|
|
动态路由设置：
router0设置：
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int s2/0
选择串口
Router(config-if)#clock rate 9600
DCE端设置频率
Router(config-if)#no ip addr
去掉原有IP
Router(config-if)#ip addr 5.5.5.100 255.0.0.0
设置串口IP
Router(config-if)#no shut
重启
Router(config-router)#router rip
开启动态路由RIP
Router(config-router)#version 2
Router(config-router)#network 1.0.0.0
Router(config-router)#network 2.0.0.0
Router(config-router)#network 5.0.0.0
Router(config-router)#no auto-summary//强制不自动汇总
声明直连网络
Router(config-router)#^Z
Router#显示路由信息
Router#sh ip route
C 1.0.0.0/8 is directly connected, FastEthernet0/0.1
C 2.0.0.0/8 is directly connected, FastEthernet0/0.2
R 3.0.0.0/8 [120/1] via 5.5.5.101, 00:00:07, Serial2/0
R 4.0.0.0/8 [120/1] via 5.5.5.101, 00:00:07, Serial2/0
C 5.0.0.0/8 is directly connected, Serial2/0
Router#
Router#